FOAMGLAS® PERINSUL HL

FOAMGLAS® PERINSUL HL is a very high density speciality product used to eliminate structural thermal bridging. The upper and the lower surface of the insulation are bitumen coated and laminated with a PE/Glass Fleece Composite, compatible with mortar. The upper side is green.

Width

100 - 210 mm

Thickness x Length

60 - 140 x 450 mm

Density

200 kg/m³

Compressive strength

CS ≥ 2.75 MPa

λ value

0.068 W/mK

Applications

Floor-wall base element to eliminate structural thermal bridging and rising damp:

Parapet walls

Product type PERINSUL

The closed cell nature of PERINSUL HL means
- it will retain its low thermal conductivity
- it resists the passage of moisture and vapour into the structure, contributing to other damp proofing measures and
protecting timber and steel components.

Cellular glass insulation does not shrink or degrade over time, retaining its performance for the life of the building and has the potential for re-use in future projects.

Grade PERINSUL HL

Capable of bearing the structural loads of a three storey building, FOAMGLAS® PERINSUL HL is laid in a mortar bed and eliminates thermal bridging at junction details. It is a unique load-bearing insulation element, and has been tested in accordance with Eurocode 6 specifically to bear loads imposed by structural masonry.